-
FNIRSI DMC-100 is a rechargeable 10,000-count True RMS clamp multimeter designed for electricians, technicians, automotive troubleshooting, solar and battery-system checks, and general electrical maintenance. Its clamp measures AC or DC current without opening the circuit, while the included test leads support voltage, resistance, capacitance,...Regular price $65.99Regular priceUnit price per
-
The TOOLTOP ET14C is a standalone 25 Hz thermal camera for visualizing heat patterns during electrical, HVAC, building-envelope and equipment inspections. Its VOx sensor produces a 240 × 240 thermal image on a 2.8-inch IPS display, while adjustable emissivity helps match the surface being...Regular price From $461.99Regular priceUnit price per
-
The TOPDON BT100 and BT200 are compact battery-system analyzers for 12V lead-acid batteries. Both models evaluate battery condition, cranking performance, charging-system behavior, and ripple for Flooded, AGM, Gel, EFB, and VRLA batteries rated from 100–2000 CCA. Choose BT100 for straightforward 12V diagnostics with a...Regular price From $142.99Regular priceUnit price per
-
The KWS USB-C Power Meter is a compact inline tester for checking charging voltage, current, power, accumulated capacity, energy, and elapsed time. Choose the display and data layout that fits your work: the compact OLED KWS-2301C, the larger TFT KWS-2302C, or the expanded-display KWS-2303C....Regular price From $38.49Regular priceUnit price per
-
A bench-ready digital microscope for PCB soldering, coin inspection and close-up electronics work. The MK7 combines up to 1200X advertised magnification, a 7-inch display, manual focus, adjustable LED illumination, still-photo capture and 1080FHD video recording in one compact inspection station. Why choose the MK7?...Regular price From $126.49Regular priceUnit price per
-
Standalone thermal inspection for electrical, HVAC, mechanical, automotive and building diagnostics. The rechargeable HABOTEST HT821A combines a wide -20°C to 550°C measurement range with a 2.8-inch color display, photo capture, multiple thermal palettes and visible/infrared image fusion. It works as a self-contained handheld thermal...Regular price From $263.99Regular priceUnit price per
- HT821A
- HT821A Plus
-
UNI-T UT363 and UT363BT are compact vane anemometers for spot-checking airflow and ambient temperature at HVAC registers, exhaust fans, workshops, and outdoor sites. Both models measure wind speed from 0 to 30 m/s (0–108 km/h; 0–5,905 ft/min; 0–58 knots; 0–67 mph), temperature from -10...Regular price From $98.99Regular priceUnit price per
-
Connect this compact inspection camera directly to a compatible phone or tablet for automotive, plumbing, appliance and household inspection. Choose a single front-view lens or a dual-lens configuration with front and side views, plus a semi-rigid cable length suited to the job.Key capabilities 1920...Regular price From $43.99Regular priceUnit price per
-
The T31 is a standalone 4.3-inch inspection camera with interchangeable probe configurations for automotive, plumbing, HVAC and machinery work. It supports single-, dual-, triple-lens and autofocus probes, plus removable semi-rigid cables for different access distances. Key capabilities 4.3-inch IPS display 3.9 mm, 5.5 mm...Regular price From $98.99Regular priceUnit price per
-
This standalone 5-inch inspection camera provides single-, dual-, triple-lens and autofocus probe choices for automotive, plumbing, HVAC and machinery inspection. The semi-rigid cable holds its shape while the integrated screen provides immediate viewing without a phone. Key capabilities 5-inch IPS display with 178° stated...Regular price From $109.99Regular priceUnit price per
-
The J500 is a slim 3.9 mm industrial borescope with two-way articulation and a 5-inch display for inspecting engine cylinders, machinery, narrow pipes and other confined spaces. A thumb control steers the probe tip for targeted viewing without rotating the full cable. Key capabilities...Regular price From $219.99Regular priceUnit price per
-
Inspect hard-to-see areas with a compact 6 mm camera probe and responsive two-way articulation. This standalone inspection camera is designed for automotive diagnostics, machinery maintenance, HVAC work, pipe inspection and other non-medical applications where a fixed borescope cannot provide the required viewing angle. Key...Regular price From $164.99Regular priceUnit price per
-
The S10 is a standalone industrial inspection camera offered with 3.9 mm, 6 mm or 8 mm probe configurations and single- or dual-lens viewing. It is intended for automotive, machinery and confined-space inspection where a compact probe and directional viewing improve access. Configuration overview...Regular price From $241.99Regular priceUnit price per
-
This 5-inch standalone inspection camera supports multiple interchangeable probe configurations for automotive, plumbing, HVAC and machinery work. Select the probe diameter, viewing arrangement and cable length that match the access path and inspection target. Key capabilities 5-inch IPS display with wide viewing angle 3.9...Regular price From $109.99Regular priceUnit price per
-
This accessory set adds retrieval, side-view and lens-protection functions to compatible inspection cameras. Select the size that matches the outside diameter and threaded tip of your borescope camera. Included accessories Hook for retrieving rings, keys and other small items Magnet for retrieving small ferrous...Regular price $16.49Regular priceUnit price per
-
Turn a compatible Android phone or Windows computer into a compact thermal inspection system. The AMPBANK M256 uses a 256 × 192 infrared sensor for HVAC, electrical, automotive, insulation, moisture-pattern, and equipment inspections. Core specifications Infrared resolution 256 × 192 Temperature range -20–450°C (-4–842°F)...Regular price $197.99Regular priceUnit price per
-
Turn a compatible Android USB-C phone into a compact thermal inspection camera. The TOOLTOP T7 combines a 256 × 192 infrared sensor, smooth 25 Hz imaging and a wide -15°C to 600°C measurement range for electrical, HVAC, automotive, electronics and building diagnostics. Compatibility notice...Regular price From $307.99Regular priceUnit price per
-
Turn a compatible smartphone into a portable infrared inspection tool with the UNI-T UTi mobile thermal camera series. The range includes dedicated models for Android phones and a separate iPhone/iOS model, with 25 Hz imaging, adjustable emissivity, multiple measurement tools and detector options up...Regular price From $219.99Regular priceUnit price per
-
This compact digital microscope combines a 4.3-inch IPS display, adjustable focus and eight adjustable LED lights for close-up inspection of circuit boards, solder joints, coins, watch parts and other small objects. Key capabilities Rated magnification up to 1000X Photo capture up to 10 MP...Regular price From $76.99Regular priceUnit price per
-
FNIRSI WMT-10 is a rechargeable, pinless moisture meter for comparative checks on wood and selected wall materials. Its inductive sensor reads without driving pins into the surface, making it useful for woodworkers, remodelers, inspectors, and maintenance teams who need fast, non-destructive screening. The 2.4-inch...Regular price $80.29Regular priceUnit price per
-
Scan before you drill, cut, or mount. The FNIRSI WD-01 / WD-02 wall scanner is designed to help locate common hidden targets—including metal, framing or other foreign objects, and energized AC wiring—behind suitable wall, floor, and ceiling surfaces. Visual center guidance, traffic-light indicators, and...Regular price From $84.69Regular priceUnit price per
-
The Ninth World BNC4N1 combines four common cable-continuity functions in one portable tester for technicians, installers, and maintenance teams. It checks RJ45 network cable, RJ11 telephone cable, USB Type-A-to-Type-B cable, and BNC coaxial cable connections using LED pin indicators and an audible beeper. The...Regular price $50.59Regular priceUnit price per
